To specify which columns to display for peptide results, click the Pick Peptide Columns button in the View section of the MS2 Runs page (see Viewing an MS2 Run). On the Pick Columns page, you can see all available columns and select which to display in the current view. You can also set which columns are displayed by default.
The currently displayed columns appear in the Current field. You can edit the columns that appear in this list manually for finely tuned control over which columns are displayed in what order.
| Peptide Column | Column Abbrev | Description |
|---|---|---|
|
Scan |
The number of the machine scan from the run. |
|
|
RetentionTime |
RetTime | The peptide's elution time. |
| Run | A unique integer identifying the run. | |
| RunDescription | A description of the run, including the pep.xml file name and the search protocol name | |
|
Fraction |
The id for a particular fraction, as assigned by the MS2 Viewer. Note that a single run can be comprised of multiple fractions (e.g., if a sample was fractionated to reduce its complexity, and the fractions were interrogated separately on the MS machine, a technician can combine the results for those fractions in a single run file for analysis and upload to the MS2 Viewer). |
|
| FractionName | The name specified for a given fraction. | |
|
Charge |
Z |
The assumed charge state of the peptide featured in the scan. |
|
IonPercent |
Ion% |
The number of theoretical fragment ions that matched fragments in the experimental spectrum divided by the total number of theoretical fragment ions, multiplied by 100; higher value indicates a better match. |
|
Mass |
CalcMH+ |
The singly protonated mass of the peptide sequence in the database that was the best match. |
|
DeltaMass |
dMass |
The difference between the MH+ observed mass and the MH+ theoretical mass of this peptide; a lower number indicates a better match. |
|
DeltaMassPPM |
dMassPPM |
The difference between the theoretical m/z and the observed m/z , scaled by theoretical m/z and expressed in parts per million; this value gives a measure of the mass accuracy of the MS machine. |
| FractionalDeltaMass | fdMass | The LTQ-FT mass spectrometer may register the C13 peak in error in place of the monoisotopic peak. The FractionalDeltaMass indicates the absolute distance to nearest integer of the DeltaMass, thereby correcting for these errors. |
| FractionalDeltaMassPPM | fdMassPPM | The FractionalDeltaMass expressed in parts per million. |
|
PrecursorMass |
ObsMH+ |
The observed mass of the precursor ion, expressed as singly protonated (MH+). |
|
MZ |
ObsMZ |
The mass-to-charge ratio of the peptide. |
| PeptideProphet | PepProphet | The score assigned by PeptideProphet. This score represents the probability that the peptide identification is correct. A higher score indicates a better match. |
|
Peptide |
The sequence of the peptide match. The previous and next amino acids in the database sequence are printed before/after the identified peptide, separated by periods. |
|
|
StrippedPeptide |
The peptide sequence (including the previous amino acid and next amino acid, if applicable) filtered of all extra characters (no dot at the beginning or end, and no variable modification characters). |
|
|
PrevAA |
The amino acid immediately preceding the peptide in the protein sequence; peptides at the beginning of the protein sequence will have a dash (-) as this value. |
|
|
TrimmedPeptide |
The peptide sequence without the previous and next amino acids. |
|
|
NextAA |
The amino acid immediately following the peptide in the protein sequence; peptides at the end of the protein sequence will have a dash (-) as this value. |
|
|
ProteinHits |
SeqHits |
The number of protein sequences in the protein database that contain the matched peptide sequence. |
|
SequencePosition |
SeqPos |
The position in the protein sequence where the peptide begins. |
|
H |
Theoretical hydrophobicity of the peptide calculated using Krokhin’s algorithm (Anal. Chem. 2006, 78, 6265). |
|
|
DeltaScan |
dScan |
The difference between actual and expected scan number, in standard deviations, based on theoretical hydrophobicity calculation. |
|
Protein |
A short name for the protein sequence identified by the search engine as a possible source for the identified peptide. |
|
|
Description |
A short phrase describing the protein sequence identified by the search engine. This name is derived from the UniProt XML or FASTA file from which the sequence was taken). |
|
|
GeneName |
The name of the gene that encodes for this protein sequence. |
|
| SeqId | A unique integer identifying the protein sequence. |
The following table describes the peptide columns that are populated by ProteinProphet.
| Peptide Column | Column Abbrev | Description |
|---|---|---|
| NSPAdjustedProbability | NSPAdjProb | PeptideProphet probability adjusted for number of sibling peptides. |
| Weight | Share of peptide contributing to the protein identification. | |
| NonDegenerateEvidence | NonDegenEvid | True/false value indicating whether peptide is unique to protein (true) or shared (false). |
| EnzymaticTermini | Number of expected cleavage termini (valid 0, 1 or 2) consistent with digestion enzyme. | |
| SiblingPeptides | SiblingPeps | A calculation, based on peptide probabilities, to quantify sibling peptides (other peptides identified for this protein). |
| SiblingPeptidesBin | SiblingPepsBin | A bin or histogram value used by ProteinProphet. |
| Instances | Number of instances the peptide was identified. | |
| ContributingEvidence | ContribEvid | True/false value indicating whether the peptide is contributing evidence to the protein identification. |
| CalcNeutralPepMass | Calculated neutral mass of peptide. |
The following table describes the peptide columns that are populated during
the quantitation analysis.
| Peptide Column | Description |
|---|---|
| LightFirstScan | Scan number of the start of the elution peak for the light-labeled precursor ion. |
| LightLastScan | Scan number of the end of the elution peak for the light-labeled precursor ion |
| LightMass | Precursor ion m/z of the isotopically light-labeled peptide. |
| HeavyFirstScan | Scan number of the start of the elution peak for the heavy-labeled precursor ion. |
| HeavyLastScan | Scan number of the end of the elution peak for the heavy-labeled precursor ion. |
| HeavyMass | Precursor ion m/z of the isotopically heavy-labeled peptide. |
| Ratio | Light-to-heavy ratio, based on elution peak areas. |
| Heavy2LightRatio | Heavy-to-light ratio, based on elution peak areas. |
| LightArea | Light elution peak area. |
| HeavyArea | Heavy elution peak area. |
| DecimalRatio | Light-to-heavy ratio expressed as a decimal value. |
The following table describes the peptide columns that are specific to results
generated by the X! Tandem search engine.
| Peptide Column | Description |
|---|---|
| Hyper | Tandem’s hypergeometric score representing the quality of the match of the identified peptide; a higher score indicates a better match. |
| B | Tandem’s b-ion score. |
| Next | The hyperscore of the 2nd best scoring peptide. |
| Y | Tandem’s y-ion score. |
| Expect | Expectation value of the peptide hit. This number represents how many identifications are expected by chance to have this hyperscore. The lower the value, the more likely it is that the match is not random. |
The following table shows the scoring columns that are specific to Mascot:
| Peptide Column | Description |
|---|---|
|
Ion |
Mascot ions score representing the quality of the match of the identified peptide; a higher score indicates a better match. |
|
Identity |
Idenity threshold. An absolute threshold determines from the distribution of random scores to highlight the presence of non-random match. When ions score exceeds identity threshold, there is a 5% chance that the match is not exact. |
|
Homology |
Homology threshold. A lower, relative threshold determines from the distribution of random scores to highlight the presence of non-random outliners. When ions score exceeds homology threshold, the match is not random, spectrum may not fully define sequence and the sequence may be close but not exact. |
|
Expect |
Expectation value of the peptide hit. This number represents how many identifications are expected by chance to have this ion score or higher. The lower the value, the more likely it is that the match is significant. |
The following table shows the scoring columns that are specific to COMET:
| Peptide Column | Description |
|---|---|
|
RawScore |
Number between 0 and 1000 representing the quality of the match of the peptide feature in the scan to the top COMET database search result; higher score indicates a better match |
|
ZScore |
The number of standard deviations between the best peptide match's score and the mean of the top 100 peptide scores, calculated using the raw dot-product scores; higher score indicates a better match |
|
DiffScore |
The difference between the normalized (normalized from 0.0 to 1.0) RawScore values of the best peptide match and the second best peptide match; greater DiffScore tends to indicate a better match |
| previousnext |
| expand allcollapse all |
